|
|
|
|
|
|
263446
|
|
|
|
| |
- Economical way to boost power from fuel-injected Twin Cam engines with stock heads
- All kits include S&S gear drive cam set, adjustable pushrod kit, S&S 640” valve springs, bearings, gaskets and instructions
- Also include an S&S high-flow air cleaner kit that bolts directly to the Delphi® throttle body
- Kits require 3-7/8” bore “pop up” piston kits (sold separately) which for the 06 Dyna yields a 95” displacement and a compression ratio to 9.7:1, and for 96” models yields a 103” displacement and a compression ratio of 10.5:1
- Made in the U.S.A.
Note: We recommend these kits for engines with ported cylinder heads to take advantage of the increased lift of the S&S cams. Kits with the 585G camshafts are recommended for engines with “decked” cylinder heads and compression ration of 10:1 to 10.5:1. S&S 95” kits may be installed in stock 88” engines if the stock 88” cylinder are bored from 3-3/4” to 3-7/8” bore, or if 3-7/8” bore cylinders are purchased.
Note: This project requires a skilled technician. It is the responsibility of the person assembling the parts to check all clearances and assembly specifications.
|
|
|
