|
|
|
|
|
|
263334
|
|
|
|
| |
- Truly complete Twin Cam-style 124” motors
- All motors have a 4 1/8” bore, a 4 5/8” stroke and forged pistons with 10.8:1 compression ratio
- Feature super strong S&S Twin Cam-style crankcases with extra thickness in key stress areas
- Timken®-style sprocket shaft bearing for superior strength and load capacity
- S&S’s legendary flywheel, connecting rods, .640 lift gear drive cams, S&S cylinders and pistons, S&S cylinder heads, rocker arms, rocker covers and electric compression releases; also feature the new S&S Twin Cam-style oil pump and tappets
- Available in single-bore fuel-injection style or carbureted style
- Single-bore fuel-injection version features a Delphi-style S&S Variable Fuel Injection (VFI) module, manifold, throttle body, fuel rail, injectors and Desperado teardrop air cleaner (Harley-Davidson® Screamin’ Eagle® EFI Race Tuner Kit or similar aftermarket single-bore fuel-injection module may also be used)
- Throttle body has the same bore diameter as S&S Super G carburetor, so it provides ample airflow for high-performance 124” motors; does not include idle air control motor, throttle position sensor, MAP sensor or temperature sensor; optional tuned induction air cleaner available
- Carbureted versions feature an S&S Super G series carb with the slotted “Desperado” air cleaner cover, and come with an S&S Intelligent Spark Technology (IST) ignition system which automatically adjusts ignition timing, retarding it at detonation or during knocking to prevent engine damage, and advancing it for maximum power and economy when detonation or knocking is not present
- Made in the U.S.A.
Note:These motors are for use in applications where the oil tank is located lower than the oil pump.
Note: If a different intake system is used on the fuel-injected motor, the fuel map must be modified.
Note: Installation of 124” motors in 01-05 Dyna models requires oil line installation kit PART #263364; this kit includes a special transmission top cover and oil lines. Installation in 99-05 FLT models requires oil line installation kit 263292, but the stock transmission cover may be used.
|
|
|
